Riding Lawn Mower Blade Replacement

Riding Lawn Mower Blade Replacement Instructions

It is important to sharpen the cutting blades on your riding lawn mower cutting deck at least once each year to ensure your machine cuts grass as intended. Follow the steps below to remove and either sharper or replace the cutting blades.

Note that if your riding lawn mower or the cutting blades are damaged from hitting an object in your yard, it is best to take it to a local MTD certified service dealer for repairs.

 

Intructions

Step 1: Prepare your riding lawn mower

Park your riding lawn mower on a flat, level surface. Turn it off, remove the key, and lock the parking brake. Disconnect the spark plug wire. Next, follow the instructions in your operator's manual for removing the mower deck. Place the mower deck in the upside-down position on a piece of cardboard or blanket to avoid scratching the unit.

Step 2: Attach the blade removal tool

Place the blade removal tool over one end of one of the cutting blades and the side of the mower deck. Tighten the clamping screw onto mower deck until the blade removal tool is firmly in place.

Step 3: Remove the cutting blade

Use a socket wrench or breaker bar to loosen and remove the bolt holding the cutting blade in place. Remove the blade and blade adapter parts (if equipped) - note the correct position of the cutting blade prior to removal.

Step 4: Inspect the cutting blade

Inspect the cutting blade to determine if it can be sharpened or if it needs to be replaced.

Step 5: Re-install the cutting blade

To re-install the cutting blade, insert one end of the blade into the blade removal tool. Confirm that the cutting blade is in the correct position. Line up the center hole and guides on the shaft with the holes on the cutting blade. Install the blade bolt and retention hardware. Tighten the blade bolt to the proper torque setting as noted in your owner's manual.

Perform steps 2-5 for each cutting blade.

Step 6: Re-install the cutting deck on your riding lawn mower

Place the mower deck in the right side-up position. Follow the instructions in your operator's manual for re-attaching the mower deck to your riding lawn mower.

Step 7: Re-connect the spark plug

Re-connect the spark plug wire to the spark plug.

Fix equipment issues quickly

When you need parts for your riding lawn mower, you can use the MTD Genuine Parts Part Finder to find the correct one. Common parts include:

Shop equipment and parts

 

The MTD Genuine Parts Knowledge Center provides do-it-yourself instructions for performing many basic maintenance items, including replacing cutting blades, drive and deck belts, and engine oil. If you find your machine has a bigger problem, use our service locator to find a qualified MTD service provider in your area.